서브비쥬얼
메인컨텐츠
LNB메뉴
1)Dry type one component PU Resin for skin layer
| Articles | Solid (%) |
Viscosity poise/20℃ |
Solvent | Physical PIopelties of Film | Charactelistics | ||
|---|---|---|---|---|---|---|---|
| 100%Modulus (㎏/㎠) |
Tensile strenμh (㎏/㎠) |
EloIIgation (%) | |||||
| UB-225A | 30±1 | 600 - 900 | MEK, DMF | 60 - 70 | 450 - 550 | 450 - 550 |
Low temp. flexibility. Hydrolysis resistant |
| UB-235 | 30±1 | 600 - 900 | MEK, DMF | 30 - 40 | 400 - 500 | 500 - 600 |
Low temp. flexibility. Hydrolysis resistant Wet touch |
| UB-250 | 30±1 | 600 - 900 | MEK, DMF | 110 - 120 | 550 - 650 | 450 - 550 | Normal type, Enalnel type |
| UB-501MB | 30±1 | 600 - 900 | MEK, DMF | 60 - 70 | 400 - 500 | 500 - 700 |
Low temp. flexibility. Hydrolysis resistant Good for making Molding |
| UB-515 | 25±1 | 600 - 900 | MEK, DMF | 110 - 130 | 300 - 400 | 350 - 450 |
Heat resistant Good for making Molding Hydrolysis resistant |
| UB-514E | 30±1 | 600 - 900 | MEK, DMF | 80 - 100 | 550 - 650 | 500 - 600 |
Low temp. flexibility. Hydrolysis resistant Enamel type |
| UB-517 | 30±1 | 600 - 900 | MEK, DMF | 60 - 70 | 550 - 650 | 450 - 500 |
Low temp. flexibility. Hydrolysis resistant |
| UB-960 | 30±1 | 600 - 900 | MEK, DMF | 60 - 70 | 450 - 550 | 500 - 600 | Normal type |
2) DIy type two component PU Resin fbr adhesives
| Articles | Solid (%) |
Viscosity poise/20℃ |
Solvent | Physical Properies of Film | Charactelistics | ||
|---|---|---|---|---|---|---|---|
| 100%Modulus (㎏/㎠) |
Tensile strength (㎏/㎠) |
EIongation (%) | |||||
| UA-5700 | 70±1 | 800 - 1000 | MEK, DMF | 20 - 30 | 200 - 300 | 300 - 400 | Hydrolysis resistant |
| UA-5900 | 70±1 | 800 - 1000 | MEK, DMF | 20 - 30 | 200 - 300 | 300 - 400 | Hydrolysis resistant |
| UA-5900D | 70±1 | 500 - 800 | MEK, DMF | 20 - 30 | 200 - 300 | 300 - 400 | Hydrolysis resistant |
| UA-5970M | 70±1 | 800 - 1000 | MEK | 23 - 30 | 200 - 300 | 300 - 400 | Hydrolysis resistant |
| UA-7500NY | 70±1 | 600 - 900 | MEK, DMF | 18 - 25 | 150 - 250 | 300 - 500 |
Normal type Low temp. flexibility. |
| UA-7670 | 70±1 | 800 - 1000 | MEK, DMF | 20 - 30 | 200 - 300 | 300 - 500 |
Normal type |
3) Examples according to properties (Leather of Dry & Wet process, Action Leather)
| One component (Skin) | Two component(Adhesive) | |
|---|---|---|
|
Normal type |
UB-960 | UA-7500NY, UA-7670 |
| Low temρ flexibility type | UB-235, UB-225A, UB-517 | UA-7500NY, UA-7670 |
| HYdrolysis resistance type | UB-235, UB-225A, UB-517 | UA-5900(D), UA-5960, UA-5970 |
| Enamel type | UB-250, UB-514E | UA-7500NY, UA-5900(D) |
| Molding type | UB-501MB, UB-515 | UA-5700, UA-5900(D), UA-5700 |
푸터
서울 중구 남대문로 3가 88번지 (우편번호 : 100-093) TEL : 02-753-2552 FAX : 02-753-7009 E-mail : central@fine-corp.co.kr
Copyright(c) 2015 FINE Industry Corporation All Right Reserved. Desinged by Sinbiweb